Proses Pembuatan Cetakan Pasir Silika GS2 dengan Pengikat Semen Kelabu, Semen Putih, dan Gula Tetes pada Hasil Cor Besi Tuang Kelabu Mentel Gilingan Tebu (CD + Cetak)

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

CD-ROM

Proses Pembuatan Cetakan Pasir Silika GS2 dengan Pengikat Semen Kelabu, Semen Putih, dan Gula Tetes pada Hasil Cor Besi Tuang Kelabu Mentel Gilingan Tebu (CD + Cetak)

Saka, I Nengah Wisnu - Nama Orang;

The metal casting process is a product manufacturing technique where the metal is melted into the melting furnace and then poured into a molding cavity. Silica sand can be used as a basic material for making sand molds. The advantages of silica sand include: resistance to high temperatures, can be used repeatedly, has a finer (mesh) finer than mountain sand and river sand. Disadvantages of silica sand include: surfaces from poor casting results and require further processing such as machining. This study aims to determine the process of making GS 2 silica sand molds from sugar cane mill coat to the results of cast products, namely sugar cane mill coat. Before silica sand is used as a mantle material printing silica sand cane mill passes tests that include: water content, particle size test, and content test SiO2. The results of the water content test of GS 2 silica sand 1.5 - 4%, the particle size measurement of silica sand GS 2 20-30 AFS (American Foundry Society), and the test level of SiO2 of GS 2 silica sand 85%. After passing the test, the silica sand will be mixed with 1.57% gray cement binding, 0.63% white cement, 3.76% drops of sugar, 94.04% silica sand. Further tests include shear strength and compressive strength test results from the compressive and shear tests obtained 2200 grams / cm2 for compressive tests and 1500 grams / cm2 for shear tests.
Key word :
making silica passir molds, GS 2 silica sand test results, binder mixing composition

Ketersediaan

Perpus Pusat (L2 AV) 010 MSN2020 SAK p

99200512MS

Tersedia namun tidak untuk dipinjamkan - No Loan

Informasi Detail

Judul Seri: -
No. Panggil: 010 MSN2020 SAK p
Penerbit: Malang : Jurusan Teknik Mesin Fakultas Teknik Universitas Merdeka Malang., 2020
Deskripsi Fisik: PDF, 4.870 KB
Bahasa: Indonesia
ISBN/ISSN: -
Klasifikasi: 010 MSN 2020
Tipe Isi: -
Tipe Media: -
Tipe Pembawa: -
Edisi: -
Subjek: MAKING SILICA PASSIR MOLDS
GS 2 SILICA SAND TEST RESULTS
BINDER MIXING COMPOSITION
Info Detail Spesifik: -
Pernyataan Tanggungjawab: -

Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas

Tidak Ada Data

Komentar

Anda harus masuk sebelum memberikan komentar